Anodized, PMMA & CNC Finishes: The Colorful Side of EDC
Aktie
Color in EDC is not paint — it is finish technology. Anodized titanium gets its color from an oxide layer, PMMA carries color through the whole material, and CNC metal finishes are engineered coatings. In 2026 the colorful side of EDC at Lightyear24 runs from $49 to $79, and the color is part of the mechanism story. Here is how the finishes work.
The Three Color Technologies
Anodizing — an electric process builds a colored oxide layer on titanium; the color is part of the metal, so it does not chip. PMMA — acrylic is colored through, so scratches stay the same color as the body. CNC + LED — machined metal with engineered finishes or glow slots for a light-up accent. Paint chips; these three do not — which is why colorful EDC lasts.
The Colorful Lineup at Lightyear24 (2026)
Titanium Spinner Top — $63.70
An ice-crystal anodized titanium hand twister with a ceramic bead tip, in seven colors. Shop the Titanium Spinner Top.
Crystal Candy EDC Push Card — $59
Ultra-dense dual-tone PMMA in eight colors, engravable — the widest colorway range. Shop the Crystal Candy Card.
Starfield Transparent Mechanical Push Card — $69
A see-through PMMA shell with a brass track and dual springs, three colors — engineering you can watch. Shop the Starfield Card.
Mecha Magnetic Push Card — $60
High-density alloy with an LED glow slot and crisp magnetic click — the light-up CNC piece. Shop the Mecha LED Card.
Infinite Slide Magnetic Slider — $49
Full metal with a flame-core design in six colors, any-angle push, engravable. Shop the Infinite Slide.
Finish Comparison Table
| Piece | Price | Finish | Colors |
|---|---|---|---|
| Titanium Top | $63.70 | Anodized | 7 |
| Crystal Candy | $59 | Dual-tone PMMA | 8 |
| Starfield | $79 | See-through PMMA | 3 |
| Mecha LED | $69 | CNC alloy + LED | 1 + glow |
| Infinite Slide | $49 | Full metal | 6 |
FAQ
Does anodized titanium color wear off?
No — anodizing colors the oxide layer of the metal itself, so it is part of the titanium rather than a coating on top. It is the most durable color finish in EDC.
Which color finish photographs best?
The Starfield ($79) and Crystal Candy ($59) — PMMA carries light, which makes the colors pop in photos and under desk light.
Is the Mecha LED battery powered?
The LED glow slot is a low-power accent; check the product page for the power method and duration.
The Bottom Line
Colorful EDC at Lightyear24 is finish technology, not paint: anodized titanium ($63.70), PMMA ($59–$79), and CNC with LED ($69). Pick by how you want the color to behave — durable anodize, glowing PMMA, or light-up alloy.
See the material science in Push Card Materials Compared.