Ghost 2026 EDC Push-Card | Dual-Rail 32-Step Mechanism | 6 Materials | Ghost Relief | Engravable

Free Personalization Included

Character Limit: 10 characters
Engraving Location: Body
How to Order: Add your engraving text in the note field on the cart page before placing your order

👻 Six Material Options — Two Families

Stainless Steel Family:

• Snow Silver — 80.9g: Mirror-polished stainless steel. The ghost relief and gold-tone badge panel read at maximum contrast against the bright silver body. The heaviest variant — the most substantial hand presence of the six options. Full metal density in every push stroke.
• Gun Black — 78.8g: PVD-coated stainless steel in deep matte black. The gold-tone ghost badge reads dramatically against the dark body — high contrast, two-tone appearance. PVD coating adds scratch resistance while preserving the precision of the underlying form geometry.
• Gold — 78.8g: PVD gold-coated stainless steel. The ghost figure reads in tone-on-tone gold relief against the gold body — a more subtle, unified appearance than the Silver or Black variants. The gold body and ghost badge are the same material family: warm, high-reflectance, and visually unified.
• Ice Blue — 77.7g: PVD-coated stainless steel in an iridescent blue-to-silver gradient finish. The chrome edge detail and blue body face create a two-tone color split across the body — blue on the face, chrome on the rails and edges. The ghost badge reads in gold against the blue face.

Composite / Engineering Polymer Family:

• G10 Wood Grain — 43.6g: G10 fiberglass composite with a layered wood-grain pattern in yellow and black. G10 is the same material used in high-end knife handles and precision instrument panels — dimensionally stable, moisture-resistant, and texturally distinct from any metal or plastic surface. The wood-grain layering pattern is visible on all four side edges of the body as a stack of alternating color laminations. At 43.6g, this is a lightweight carry option with the same 32-step mechanism and ghost face as the stainless options.
• PEI Natural — 38.5g: PEI (polyetherimide) engineering polymer in natural amber-gold color. PEI is a high-performance thermoplastic used in aerospace and medical device components — heat-resistant, chemically stable, and rigid with a slight translucency in thin sections. The natural PEI body has a warm amber tone that complements the gold ghost badge panel. The lightest variant at 38.5g.

✨ Key Features

• Dual-Rail Mechanical Push — 32-Step Total Click Feedback: The push mechanism runs on two parallel precision rails machined into the body interior. The slider travels the full rail length with 16 defined click positions on the push stroke and 16 on the return — 32 total step engagements per full push-and-return cycle. Each step is mechanically distinct: a positive click engagement as the step locks, smooth travel between steps, and a clean release into the next position. The dual-rail guide system eliminates lateral play in the slider travel — the push direction is perfectly linear with no wobble or side-load feel.
• Ghost Character Relief — Raised Metal Face with Gold Badge Panel: The face of the push-card carries a ghost character in raised relief: two oval eye cutouts through the face material, a rounded ghost body outline in relief above the badge panel, and a rectangular gold-tone badge panel in the lower section reading "GHOST 2026." The ghost figure is not printed or applied — it is formed in the material of the face itself through CNC machining, making the relief three-dimensional and durable across the life of the object.
• Compact Push-Card Format — 49.3 × 25.4 × 13.2mm: Stadium-rectangle silhouette with rounded corners and a layered edge profile from the dual-rail body construction. The push slider extends from the bottom end of the card body and retracts flush on the return stroke. Card proportions fit naturally between three fingers in a push grip. Pocket carry without sharp edges.
• Free Engraving (Up to 10 Characters): Personalize the body with a name, initials, date, or short text — engraved before shipping.

📐 Specifications

• Mechanism: Dual-rail mechanical push — 32-step total click feedback (16 push + 16 return)
• Dimensions: 49.3mm × 25.4mm × 13.2mm / 1.94" × 1.00" × 0.52"
• Face design: Ghost character relief + gold-tone badge panel (GHOST 2026)
• Carry: Pocket EDC / desk
• Engraving: Free, up to 10 characters — add your text in the note field on the cart page