Ghost EDC | Dual-Face Stainless Steel | Magnetic Tuning Fork + Spin Rotor | CNC | Engravable

Free Personalization Included

Character Limit: 10 characters
Engraving Location: Steel body
How to Order: Add your engraving text in the note field on the cart page before placing your order

👻 Two Finishes — Same Form, Opposite Character

• Snow Silver (Stainless Steel Bright): The natural mirror-polished stainless steel finish — highly reflective, cool, and precise. The gold-tone ghost relief engraving reads at maximum contrast against the bright silver body. The CNC surface detail — fingerprint arc lines, ghost figure outlines, lettering — is most visible in Snow Silver, where the shadow depth of each engraved line is sharpest against the polished surface.
• Gun Black (PVD-Coated Stainless Steel): A deep, flat matte black applied over the full stainless steel body via physical vapor deposition (PVD) coating — the same process used on high-end watch cases and tactical instruments. The gold-tone ghost relief stands out dramatically against the dark body, creating a high-contrast two-tone appearance that reads as premium from every viewing angle. The PVD coating adds scratch resistance while maintaining the precision of the underlying CNC geometry.

🎵 Two Mechanisms — Tuning Fork Face & Rotor Face

• Magnetic Tuning Fork (Ghost Figure Face): Two parallel steel tines extend from the lower section of the ghost-face panel. The tines are tuned to a specific frequency — pluck either tine with a fingernail or thumb and the body resonates with a clear, high-pitched metallic tone that sustains for several seconds. The magnetic element in the tine assembly amplifies the resonance and extends the sustain beyond what an unassisted steel fork produces. The tone is crisp, clean, and distinctly metallic — the kind of sound that commands attention in a quiet room without being loud in a shared one.
• Magnetic Spin Rotor (Round Ghost Icon Face): A circular gold-tone disc engraved with the round ghost icon is set into a precision bearing assembly on the reverse face. The disc spins freely under finger contact — apply rotational pressure with a thumb or two fingers and it accelerates; remove contact and it coasts on the bearing. The magnetic element in the rotor assembly creates a subtle detent effect as the rotor passes through defined rotational positions — a slight resistance and release that produces a secondary tactile sensation layered over the primary spin feel.

✨ Key Features

• 304 Stainless Steel — Full CNC Body, 125.1g: The entire body is 304 stainless steel, machined from a solid block via CNC precision carving. 304 stainless is corrosion-resistant, scratch-resistant under normal carry conditions, and dimensionally stable — the same grade used in medical instruments, kitchen tools, and high-end hardware. At 125.1g, the Ghost EDC has substantial hand presence — it registers as a precision-made metal object from the first contact, not a lightweight plastic fidget toy.
• Dual-Face CNC Relief Engraving — Gold-Tone on Steel: Both faces carry CNC-engraved gold-tone relief designs applied through precision carving of the stainless steel surface. The ghost figure on the tuning fork face fills the upper two-thirds of the panel with a detailed character outline, jagged skirt hem, and two black oval eye cutouts. The round ghost icon on the rotor face is set into the spinning disc itself — the engraving rotates with the rotor. The fingerprint arc line pattern on the lower section of each face is machined as a series of concentric curved grooves that provide additional grip texture and visual depth.
• Pocket EDC Format — 52.1 × 26.2 × 16mm: Stadium-capsule silhouette with fully rounded ends and a layered edge profile. The 16mm thickness is substantial but within normal pocket-carry range. The rounded ends eliminate sharp corners from pocket contact. Both mechanisms are accessible without repositioning the grip — flip the body over to switch between tuning fork and rotor.
• Free Engraving (Up to 10 Characters): Personalize the steel body with a name, initials, or short text — engraved before shipping.

📐 Specifications

• Material: 304 stainless steel — CNC machined
• Finish: Snow Silver (polished) / Gun Black (PVD-coated)
• Mechanisms: Magnetic tuning fork (audible resonance) + magnetic spin rotor (continuous spin with detent)
• Relief design: Gold-tone CNC engraving — ghost figure (tuning fork face) + round ghost icon (rotor face)
• Dimensions: 52.1mm × 26.2mm × 16mm / 2.05" × 1.03" × 0.63"
• Weight: 125.1g / 4.41oz
• Carry: Pocket EDC / desk
• Engraving: Free, up to 10 characters — add your text in the note field on the cart page