Magnetic Levitation Moon Lamp | 3-Level Warm Dimmer | Walnut Base | Engravable Night Light

Free Personalization Included

Character Limit: 20 characters
Engraving Location: Walnut-grain wood base
How to Order: Add your engraving text in the note field on the cart page before placing your order

✨ Key Features

• Magnetic Levitation — 15mm Suspension Gap, Stable Hold: The moon sphere is held in stable suspension 15mm above the base surface by an electromagnetic levitation system built into the base. The levitation field is self-stabilizing — once the moon is positioned correctly, the system locks it in place and maintains suspension without adjustment. If power is interrupted, the moon lowers smoothly onto the base and holds in position magnetically. Restore power and it rises again.
• Wireless Power Transmission — No Battery, No Charging: The moon sphere contains no battery and requires no charging. Power is transmitted wirelessly from the base through the levitation field — the same electromagnetic system that keeps the moon suspended also delivers the power that lights it. Place the moon on the base and it lights immediately. Remove it from the base and the light goes off. The system is always on when the base is plugged in.
• 3D-Printed Moon Surface — 14cm Diameter, High-Fidelity Crater Detail: The 14cm sphere is 3D-printed from ABS and biodegradable PLA using lunar topography data. The surface carries accurate crater relief — highlands, maria, and impact craters rendered at a scale and depth that reads clearly both in light and shadow. The 3D-printed surface diffuses the internal warm white light unevenly — thinner areas glow brighter, thicker crater walls cast subtle interior shadows — producing the uneven, luminous quality of the actual moon rather than a uniform sphere of light.
• 3-Level Warm White Dimmer: The moon glows in warm white light across three brightness levels — low (ambient night light), mid (comfortable room reading light), and bright (statement desk lamp). Cycle through levels with a single touch on the base. The 3000K warm white color temperature is comfortable for extended viewing and does not disrupt sleep cycles when used as a bedside light.
• Manual Rotation — Spin and Hold: The suspended moon can be rotated manually at any time. Give it a spin with a fingertip and it continues rotating under its own momentum, slowing gradually as air resistance reduces speed. Stop it with a fingertip and it holds the new position. Spin speed and direction are fully user-controlled.
• Walnut-Grain Wood Base — 13.4 x 13.4 x 2.8cm: The square base is finished in a walnut-grain texture — warm, dark reddish-brown wood grain that contrasts with the pale glow of the moon above. The base is compact and low-profile: 13.4cm square and only 2.8cm tall, with a clean rectangular form that suits desk, shelf, or bedside placement. The power cable exits from the rear of the base and connects to a standard USB or wall adapter.
• Free Engraving (Up to 20 Characters): Personalize the base with a name, date, message, or short quote — engraved before shipping. 20 characters is enough for a full name and year, a short dedication, or a meaningful phrase.

⚡ Power & Operation Notes

• Power: Base plugs into wall power — moon receives power wirelessly through levitation field
• Moon battery: None — no charging required
• On power loss: Moon lowers gently and holds magnetically on base surface
• Rotation: Manual spin only — flick once to spin, touch to stop. Speed and duration are user-controlled
• Levitation setup: Hold moon above base center and release slowly — the field catches and stabilizes automatically

📐 Specifications

• Moon diameter: 14cm / 5.5"
• Levitation gap: 15mm
• Moon material: 3D-printed ABS + biodegradable PLA
• Base dimensions: 13.4cm × 13.4cm × 2.8cm / 5.3" × 5.3" × 1.1"
• Base finish: Walnut-grain texture
• Light: Warm white — 3-level dimmer (touch control)
• Power: AC adapter (base) — wireless transmission to moon
• Scenes: Bedroom / Study / Living room
• Engraving: Free, up to 20 characters — add your text in the note field on the cart page